The EnVue is a small, yet extremely powerful form factor device that is used by many Fortune 500 companies. The device tracks driver behavior, collects live vehicle data, and is a simple plug-in installation.

Technical Specs

 

Compliance RoHS compliant, lead free
Size 5 cm W x 2.5 cm H x 7.5 cm L
Weight 65 g
Housing Black ABS, IP 42 resistant with rubber gasket and boot
Environmental Tests Temperature tested between -40F to +185F / -40C to + 85C
32 Mb Non volatile Flash Memory Store Main Data Memory: Records 4,650 miles (7,500 km) of city driving or 39,936 logs. Incident Data Memory: Buffer records 102 minutes of second-by-second valid data, or 6,122 logs. Last 72 records (1.2 minutes) are sent instantly on accelerometer triggered event.
Engine Management Support for diagnostics on CAN (ISO 15765), Diagnostics on CAN for Diesel Engines (SAE J1939), Legacy OBD (SAE J1850 PWM.VPW, ISO 9141-2, ISO 14230 KWP2000). Adapter packs available for GM and heavy duty vehicles.
Operating Voltage 11V to 16V
Protection “Green” efficient PWM regulated circuitry with overvoltage protection.
Recording Parameters Curve Based Logging Algorithm gives fewer and more accurate data points.
Power Consumption Sleep Mode Current: 7mA; Operating Current: 40-150mA (engine running)
Firmware Wireless, over-the-air update Firmware can be customized for application-specific recording
Buzzer Test Mode: Alert for system diagnostic testing of GPS and wireless connection. Parameter: User can set parameters to alert driver of excess speed, above a specified speed, excessive idling or over-revving. Engine based seatbelt violation (when available). Accelerometer triggered alerts: harsh braking, harsh acceleration and harsh corners.
Clock Internal clock is set by initial GPS latch and counts seconds for time based activity during sleep mode including Heartbeat and Voltage Recording
Voltage Recording Curve based voltage logging to detect weak batteries, failing alternators, failing starters.
Heartbeat Device wakes out of sleep mode 1 hour after ignition off, then 2 hours after that, 4 hours after that and finally every 6 hours to send any buffered memory information, such as position, sensor and voltage data.
Antennas Internal GPS and GSM antennas
Accelerometer A LIS302DL from ST 3 axis accelerometer is provided for the low-voltage digital output linear MEMS housed in an LGA package. The LIS302DL has a user-selectable full scale of ±2g and ±8g and is capable of measuring accelerations with an output data rate of 100 Hz or 400 Hz.
Installation Simple plug and play installation
Intelligent Ignition Detect Non-engine based ignition detect based on voltage and movement. 2 wire installation. Perfect for older vehicles with no engine information and covert installation for asset recovery.
GPS Receiver EO-5Q • 50-channel u-blox 5 engine with over 1 million effective correlators • Under 1 second Time-To-First Fix for Hot and Aided Starts • SuperSense® Indoor GPS: -160 dBm tracking sensitivity • Accelerated startup at weak signals thanks to KickStart Technology
GSM Module LEON-G100 • Frequency: Quad-band GSM 850/900/1800/1900 MHz • Embedded TCP/IP stack • Power Consumption: 3.35 V to 4.2 V - 1.6mA idle, 300mA typical • Certification: R&TTE, CE, GCF, FCC, PTCRB, Anatel, IC